All About Heavy Construction Equipment

Basic Safety Tips For Working With Air Compressors For Construction Workers

Posted by on Jan 6, 2016 in Uncategorized | Comments Off on Basic Safety Tips For Working With Air Compressors For Construction Workers

If you own a construction company and bring a high-quality air compressor to your job sites, you need to make sure that all your construction workers know how to use and behave safely around the air compressor. Even if only a few specific employees will be using the equipment, you should still train everyone on your crew how to use the equipment in a safe manner. #1 Always Wear Proper Safety Equipment The first thing your employees need to know is what type of safety equipment they need to wear if they operate the air compressor or are near the air compressor when it is running.  The air compressor releases air with a lot of force, and can stir up dirt in the area when it is used and can turn a loose nail into a projectile, which is why it is vital that all your employees wear protective eyewear when they are using or in the vicinity of an air compressor that is in use.  Additionally, air compressors tend to be really loud, which is why your employees should also put on protective hearing gear when around or operating an air compressor.  #2 Don’t Operate In Wet Areas The second thing you need to stress is that a compressor is should only be operated in dry areas and should be stored somewhere dry as well. Wet work areas can lead to a wide variety of problems with your air compressor. To start with, operating near water can lead to electrocution. Water can also damage the electrical circuits inside of your air compressor. Additionally, prolonged exposure to wetness can cause the tools and the tank to become rusted and damaged. #3 Make Sure The Outlet Is Grounded Third, when plugging in an air compressor, it is vital that the electrical circuit is properly grounded. If the outlet is not properly grounded, the electrical panel inside of the compressor could easily become damaged. Using an ungrounded electrical circuit also increases the chances of a fire occurring. #4 Check All Hoses Before Starting The Machine Fourth, your employees should be sure to check all the hose fittings before turning on the machine each time. If the fitting is loose and comes undone when in use, it can hurt those nearby and cause damage to the machine. Additionally, loose fittings will cause the air compressor to not work properly.  #5 Make Sure The Trigger Is Off Fifth, when working with an air compressor and using the tool function, you should always make sure that it is not pulled in the onward position when turning on the machine. Your employees should also make sure that they never point any tools they are using with the air compressor towards themselves. This could cause serious injury.  #6 Perform All Maintenance When The Machine Is Off Finally, make sure your employees know that all maintenance tasks related to the air compressor should be performed when it is turned off to prevent injuries. That includes simple tasks like fixing a loose hose, and more complex tasks like adding oil or refueling. All of these tasks should be completed when the machine is off, even if they are completed by a compressor service company. Even if you only intend to have a few employees in your construction company use...

read more

Three Ways That Experienced Crane Operators Can Prevent A Nasty Accident

Posted by on Aug 27, 2015 in Uncategorized | Comments Off on Three Ways That Experienced Crane Operators Can Prevent A Nasty Accident

When you rent a crane, in most cases, you will also be hiring a crane operator to accompany it. Because cranes are huge, expensive pieces of machinery and can easily cause fatalities if involved in an accident, hiring a crane operator who has a lot of industry experience and is familiar with the type of job you are doing is vital. Most crane accidents are the result of inadequate worker training. Simply having a crane operators’ license doesn’t mean that your crane operator is skilled in avoiding accidents, as that comes with experience. For this reason, hiring the cheapest crane or getting a crane with a new or inexperienced operator can end up costing time, money and the health or lives of workers. Here are three reasons why an experienced crane operator is important for your construction project. 1. Experience Helps Them Avoid Overhead Hazards. One of the most common reasons for a crane accident is hitting an overhead power line or other object. The National Institute for Occupational Safety and Health (NIOSH) reports that an average of 15 electrocutions a year occur when a crane boom makes contact with an overhead electrical line. In fact, about a third of all electricity-related deaths at construction sites involve cranes. Well-trained crane operators can minimize risk by: Keeping the proper line clearance distance. The Occupational Safety & Health Administration (OSHA) has set a minimum clearance of 10 feet from lines that carry 50,000 or more volts. That distance increases for higher-voltage lines. Checking for the correct clearance and making sure it is maintained at all times comes more naturally to crane operators with experience on the job site. Knowing how to keep the crane’s boom from contacting lines. While the crane can’t be within a certain distance of the electrical line, it’s important to have experienced crane operators who know the proper distance to keep the crane’s boom from these lines. Being trained in what to do in case of contact. A trained crane operator will have a background in what to in worst-case scenarios, such as when contact is made with a power line.  2. Experience Makes Them Vital to Job Site Safety. Even an experienced crane operator is at the mercy of others on the job site and can make mistakes. That’s why it is also important for the job site to have a set plan for safety. An experienced crane operator will recognize the importance of having such a plan and make sure it is in place at each job site they work at.  In addition, a knowledgeable crane operator can evaluate and determine the best place for cranes to operate given the tasks they need to perform. An unstable base for the crane can result in the machine tipping or even rolling over. Icy or slick areas are not good places for cranes to operate, and a knowledgeable operator will be able to help find a proper place for the crane to sit in order to perform its duties. 3. Experience Helps Ensure Their Cranes are Properly Inspected. You rely on your crane rental company to have perfectly maintained and inspected machinery. An experienced crane operator is another confirmation that you have a crane that is in good working condition. Knowledgeable crane operators will have checked their machines before...

read more

Plasma Arc Vs. Oxy-Fuel Torch For Cutting Steel

Posted by on Aug 14, 2015 in Uncategorized | Comments Off on Plasma Arc Vs. Oxy-Fuel Torch For Cutting Steel

When fabricating steel, one of your primary concerns should be what tool to use for cutting. The two basic methods for cutting are the use of a plasma arc cutter or the use of an oxy-fuel torch. Choosing one, the other, or both for your shop will depend on the type of work that you typically do.  What Metals Do You Work with? Oxy-fuel torches will cut ferrous metals rapidly because the oxygen jet used in the cutting process will turn iron to slag which then runs out of the kerf, i.e. cut. Furthermore, an ox-fuel torch can cut through metals up to 24 inches thick. Thus, if you have to do a lot of work with thick pieces of iron or iron alloys, then an oxy-fuel torch is the right choice.  On the other hand, a plasma arc torch can cut through any metal which conducts electricity. This gives the plasma arch torch more versatility in that it can be used to cut not only ferrous metals, but also stainless steel, aluminum, copper, etc. Plasma arch torches are ideal for cutting thin sheets of metal, but they are not as good at cutting thick metals Thus, if you do a lot of work with thin pieces of various kinds of metals, then a plasma arc cutter is a good choice.  Portability A second consideration is whether you will have to travel to jobs. For example, if a farmer’s tractor breaks down, and you have to travel to the site of the break down to help make repairs, then an oxy-fuel will likely be the best choice. An oxy-fuel cutting rig consists of a fuel tank, an oxygen tank, regulators, hoses, and a handheld torch. Thus, you can easily load up your tanks and travel to a job site.  On the other hand, a plasma arc cutter consists of a bigger machine and tends to be more awkward to transport from job site to job site.  The decisions between a plasma cutter or a oxy-fuel torch will depend mostly on the type of work you or companies like Jackson-Cook Cranes will do. If you only work with steel, then the only torch you will need will be the oxy-fuel torch. You can use it in shop or on a job site, so it is a highly versatile tool. However, if you want to expand your abilities, so you can work with many different materials instead of just steel, then you should add a plasma cutter to your...

read more

The Industrial Stump Grinder | A New User’s Guide To Information

Posted by on Aug 13, 2015 in Uncategorized | Comments Off on The Industrial Stump Grinder | A New User’s Guide To Information

If you are in the middle of a construction project, tree stumps in the way can be a major issue. There is no way you can install a concrete foundation over a stump, even if it is barely protruding from the ground. An industrial stump grinder is a good choice when you run into these issues, and these machines are usually available through heavy equipment rental companies. Even though this equipment is fairly simple to use, it is likely that you will have a few questions if you have no experience with stump grinder operation. Here are a few of the most common questions about industrial stump grinder operation.  How do you maneuver the stump grinder? Most stump grinders have a joystick control that allows you to move the grinder wheel forward and back and side to side. You may also have an accelerator to speed up the blade as needed. The grinder is situated on a hydraulic arm that allows for smooth and easy maneuvering to easily position over a stump while you work.  What type of safety gear is required during stump grinder operation? While you are operating the stump grinder, you should be wearing ear plugs and safety goggles. Additionally, you must keep your hands away from the grinding blade at all times, even after you have shut down the machine and the blade seems to be slowing down.  How long does it take to remove a stump? The amount of time that it takes to remove a particular stump will depend on the size and density of the remaining wood. Smaller stumps will usually come out in just a few minutes. However, large tree stumps may take a while longer, especially if they are dense hardwood, such as hickory or oak.  Wouldn’t it be just as easy to use a backhoe to push them out of the ground? You may already have a backhoe on site, but removing stumps with a backhoe can take a lot of time and patience. You have to be able to get enough leverage on the stump to push or pull it out of the ground and this can prove difficult if the stump has a large root system. Stump grinding is much more efficient and less time consuming.  When you rent a stump grinder to get the tree stumps out of the way of your construction project, you can see them completely gone and out of your way in no time. If you have additional questions about stump grinder operation, be sure to ask the rental store attendant for more information before you get started using the equipment. Contact a company like Sound Equipment Rentals & Sales to get...

read more

Uses Of And Care For Diamond Blades

Posted by on Aug 12, 2015 in Uncategorized | Comments Off on Uses Of And Care For Diamond Blades

Diamond is the hardest substance on earth, and using diamond to coat a blade will create a durable and highly effective saw blade. While diamond blades are impressive, they are not indestructible, so proper care should be taken to protect the blade and to protect the operator. Care for a Diamond Blade Whenever you are cutting extremely hard materials like steel-reinforced cement or ceramics, the friction between the saw blade and the material will create a lot of heat. Depending on how the diamonds are adhered to the blade you are using, the friction can create enough heat to melt the sinter that holds the diamonds in place. In which case, pieces of the blade can fly off and strike the operator, other people, or pieces of equipment. Allowing a small trickle of water to run over the cutting surface will help to keep the blade cool and avoid problems.  If you are cutting tile or cement inside of a house, you may not have the option to run water over your cutting surface. In this case, you will need to extract the blade from the cut and allow it to cool frequently. Running the saw and allowing the blade to spin in open air will help to decrease the amount of time it takes to cool your blade.  Protection for the Operator Cutting through cement or ceramics will create a lot of dust, and there is the potential for sections of the material to fly off and get airborne. Thus, an operator should always wear protective goggles. Cement dust, in particular, can be dangerous if inhaled in that it can lead to silicosis. Thus, an operator should always wear a respirator. When it is necessary to make cuts without water, the operator should use some sort of a vacuum system to suck up dust and help to prevent it from getting airborne. When it is possible to use water, not only will the water help to keep the blade cool, but it will help to prevent clouds of dust from enveloping the operator. While a diamond blade makes it possible for an operator to make cuts that could not otherwise be made, it also creates some safety risks. In order to keep your equipment safe, extend the life of your blade, and prevent injury to yourself, you should always take the necessary precautions to care for your blade and keep yourself safe. For more information, talk a company like Web Granite...

read more

3 Important Safety Tips When Using Rolling Ladders

Posted by on Aug 11, 2015 in Uncategorized | Comments Off on 3 Important Safety Tips When Using Rolling Ladders

In your warehouse, you might use a rolling ladder to help you with handling materials that are kept on the pallet racks. A rolling ladder can be extremely handy, but it can also be very dangerous if you aren’t careful. These are a few tips to help you stay safe when using a rolling ladder in your warehouse. 1. Inspect the Rolling Ladder Regularly First of all, you should inspect your rolling ladder on a regular basis. Check to make sure that all of the bolts and screws are securely in place, and look for rust, which could lead to the ladder corroding and not supporting your weight. You should also make sure that the ladder has both of its “feet.” Tighten bolts and screws and replace any worn-out parts before using the rolling ladder to remain safe. 2. Lock Your Ladder in Place Even if your ladder feels secure or if you will only be working in a certain area for just a few minutes, you should always lock your ladder into place. Use the step brake or step lock as needed to keep your ladder secure; then, you don’t have to worry about it slipping while you’re in the middle of moving a heavy box. You can also tie off your ladder to help hold it in place if you will be working in a certain area for a longer length of time. 3. Store it Properly If your rolling ladder is damaged in any way, it could be more at risk of causing an accident. One great way to prevent damage is by storing it properly. If at all possible, avoid storing your rolling ladder outdoors, since the wind, rain, and snow could cause dangerous corrosion. Also, make sure that your rolling ladder is stored in an area of your warehouse where it will not be hit by forklifts and other equipment, since this could cause dents or other problems that could cause the rolling ladder to be unstable. A rolling ladder can be very handy if you have a large warehouse to work in, since it can make it easy for you to put away items and retrieve items from tall shelves all over the warehouse. However, because of its very nature, a rolling ladder can be extremely dangerous. Luckily, following these tips can help keep you—and anyone else who might use the ladder—safe. If you are in need of any warehouse material handling supplies, contact a provider like Independent Lift Truck Of Alaska for...

read more

Great Tips For Construction Equipment Rental

Posted by on Aug 7, 2015 in Uncategorized | Comments Off on Great Tips For Construction Equipment Rental

If you want to take advantage of service that will allow you to make the most of your construction project, you should look into equipment rentals in your local area. There are a number of companies that offer construction rental solutions for you, so that you have the help to take on any sort of project, whether you  need cranes, bulldozers, excavators or other such equipment. You’ll need to understand some points about construction equipment, so that you are able to get the service needed for any project. In that regard, read on and make the most of these tips. Consider The Many Benefits Of Renting Over Buying Even if you handle a number of construction projects over a long-term basis, you owe it to yourself to consider renting construction equipment, as opposed to buying it. For instance, renting construction equipment allows you to drastically lower the cost of your projects, do away with the cost and obligation of equipment maintenance and allows you to have an entire fleet at your disposal, without having to finance them. In other words, you will get the firepower and peace of mind of owning top of the line equipment, without the obligations of ownership.  Choose A Company That Has Low Emissions Equipment To be sure that you get the help and service that you need to make the absolute most of your construction projects, you should opt to be a good steward of your environment. One such way to be a good steward of the environment is to select a rental company that provides low emissions equipment. This way, you’ll be less wasteful and create far less pollution throughout the course of your projects. Further, this equipment is a lot more efficient with fuel, allowing you to spend less money as well. Always choose companies that offer equipment that is in compliance with Environmental Protection Agency standards.  Always Be Mindful Of Specifications And Needs Since you are renting construction equipment that is needed for heavy duty lifting and removal, always key in on exact specifications. You’ll need to understand lifting capability and load weight of your equipment, while also having an understanding of the needs throughout your job site. These details should be nailed down first, so that as you shop with a construction equipment rental company, you are better informed and able to get exactly what you need.  Use these tips and follow them accordingly, so that you are able to get the equipment rental for any project. For more information, contact a company like Don Leslie Supply,...

read more

Start A Commercial Plowing Business: What You Need

Posted by on Aug 6, 2015 in Uncategorized | Comments Off on Start A Commercial Plowing Business: What You Need

If you’re looking to start a snow removal business and you want to do commercial properties, you’re going to need to the right equipment. Not only will you need to have a plow large enough to do a large parking lot quickly, but you need to be able to move the snow that you plow around. There is a lot of money to be made in commercial snow removal, and you have to know how to get the clients. Most commercial property owners will require you to sign a contract, so make sure you have the staff to do a job before you take any. To start your business, here are a few things you’ll need. Advertising You’ll have to create either a flyer or a post card with your snow removal information on it to pass out to local businesses. A small website or social media page is also beneficial for people to get information. Hand the flyers out and stop and talk to local businesses, to find out when you can bid for the work. Most commercial property owners take bids, and go with the lowest provider. Machinery A heavy duty truck that can support the largest size plow will be beneficial, and some people even use bull dozers or bobcats. If you want to get more equipment without having to spend a lot of money, look for used heavy machinery equipment for sale, to get the machinery second hand. Since you’re only using it during the winter you should be able to maintain it use it for what you need without needing a new model. Salt You need to purchase salt before the season starts to make sure you will have enough to last you for the winter. Along with plowing, most commercial property owners will require you to put salt down every time there is freezing rain or snow. You will need salt for the parking lots and sidewalks, and you’ll need a salt spreader to make the work easier. If you are considering getting into the commercial plowing business and you are concerned about getting started, try to get in with small business owners to begin. Start to get familiar with plowing small business parking lots when you start. Businesses like small banks, gas stations or other business and working your way up to large department stores is going to be the best way to train. To learn more, contact a company that deals in used heavy construction equipment for...

read more

Consider Renting Contractor Equipment Instead Of Buying

Posted by on Aug 3, 2015 in Uncategorized | Comments Off on Consider Renting Contractor Equipment Instead Of Buying

Being an independent, small job contractor comes with a lot of flexibility. You can pick the types of jobs you want and schedule your own time. Having all of the right equipment for every job can sometimes be challenging. That is why it is often good to rent equipment that you only need for a short period of time. Rental Duration Equipment can often be rented for varying periods of time, giving you the flexibility to pay for as little or as much time as you need. Small-to-large equipment rental can even be for a block of hours within a day. For longer jobs, you may rent by the day, the week, or even the month. With any duration, you have the option to extend your rental period; in many cases, the extension occurs automatically if you don’t bring the equipment back within the allotted time period. Types of Equipment to Rent You can rent almost any type of equipment that you need for a small or large job. Small tool equipment can include: Augers (one or two man) Pressure washers Drying equipment Tills Pumps Sanders Ladders, scaffolding, and other structural equipment Welders Nail guns Jackhammers, sledge hammers, and other demolition equipment Power sprayers Cement mixers Even as a contractor who specializes in smaller jobs, you may need to rent larger equipment, such as: Tractors, loaders, or backhoes Aerials (for reaching those high places) Trenchers Stump grinders Full-size or Mini skid steers Moving trucks, pickup trucks, or trailers Rubbish containers Light towers (for nighttime work) Chip shredders (for grinding down any trees or shrubbery) Aerators (for landscaping work) Insurance and Liability on Rentals When you rent your equipment, you may want to consider carrying additional insurance to cover anything that happens to the equipment while you are using it. The rental company may offer insurance that you can purchase at the time of the rental. You can also purchase independent insurance that covers a number of situations that can occur during equipment rental, including: Replacement of equipment if it breaks Equipment theft, if your rental equipment is stolen while on the job Loss of equipment while in transit to your job site Accidental damage where equipment is still functional but damaged Damage to the property that is on your job site General liability Renting equipment is a great way to get the equipment that you occasionally need for the period of time you need it. Don’t forget to insure yourself against the issues that can occur when you choose to rent equipment versus purchase it. To learn more, contact a company like Rentals And More...

read more

The Truth Behind Three Common Rigging Myths

Posted by on Jul 29, 2015 in Uncategorized | Comments Off on The Truth Behind Three Common Rigging Myths

Rigging is one of the most effective methods for moving heavy machinery. Unfortunately, many new investors in manufacturing facilities and other heavy equipment find themselves overwhelmed with the many misconceptions and myths about this method of moving, which results in confusion about not only the process, but the success of the move as well. Here’s a look at a couple of common myths that you may have heard and the truth you should know before you start moving that new equipment: Myth: Rigging Services Are All the Same – Look for the Lowest Bidder This is a myth that leaves many new machinery owners facing damaged equipment in the end. To the untrained eye, every rigging method can look the same, but it is a complex, dynamic process that must be adapted to each machine individually. This misunderstanding about how the process works has led some to believe that they should just look to the lowest bidder for their moving services. The truth is, the lowest bidder isn’t always the best bet. Rigging companies can have many differences that should be considered to ensure a safe and effective move. Consider not only the job quote, but also the reputation of each company. Ask about what types of rigging services they can offer and what size and weight capacities they’ve safely handled in the past. This information allows you to evaluate the movers based on ability more than price. After all, the goal is to get your machinery moved safely and properly. Myth: Rigging Companies Don’t Offer Planning Support Don’t fall victim to the misconception that riggers only offer the physical moving services and no planning or guidance support. This kind of misconception can lead to logistical struggles when you’re trying to plan out the move, because you don’t have the expertise and understanding that riggers do about the process. Ask the rigging company for a moving consultant who can help you to plan things out based on the most practical options for your facility. Myth: Riggers Are Only Interested in Large-Scale Projects, Not Smaller Moves Although the most common calls for riggers typically involve relocating entire manufacturing floors or other large volumes of machinery, that doesn’t mean that’s all they do. The truth is, even if you’re just moving one piece of equipment off your production floor, riggers can help you do that. It’s best to work with professionals like these any time you’re moving machinery, because it’s safer than trying to do it on your own. Now that you’re familiar with three of the common myths about heavy machinery moving services, you’ll be better prepared to work with a rigging company to tackle that equipment move that’s waiting for your...

read more